Adequate lighting is important for a working environment, a cooking environment, and just for simple living. Everybody complains after Daylight Savings Time ends that it is so dark so early and they just cannot wait to get to bed - that statement itself should reflect how important lighting is in our lives. There are programs available that will change the tone and intensity of the light on your computer at a certain time during the day to reduce strain on your eyes and get you more ready for bed.
Lights are available in all shapes, colors, sizes, and types. The most well known light is an incandescent bulb, which has changed very little since Thomas Edison invented it back in the 1800s. An incandescent light bulb is made up of a glass housing, molded into its characteristic shape in a process called glass blowing, and a coiled tungsten wire. The coiled tungsten wire is what absorbs the electricity supplied to it, and glows red hot. The energy is then released as heat and light. Fluorescent light bulbs came onto the scene and brought with them a new shape. Fluorescent lights were available in long tubes, commonly seen in high bay lights, embedded into a ceiling, or they were available in the flattened light bulbs now often seen in newly renovated kitchens. Fluorescent bulbs contained a mercury and argon gas which became excited when electricity flowed through, leading to a release of ultraviolet light which was absorbed by the fluorescent phosphorus coating on the inside of the light, which would then release light in the visible spectrum. Next, LED tube lights were invented and are quickly becoming popular. LEDs are available as LED tube lighting, light bulbs, and flood lights for sport fields. LED light tubes don't possess dangerous gases like fluorescent lights and they don't release as much heat as an incandescent bulb, making them incredibly efficient.
LED light tubes are great for any who wishes to renovate his house, or an office or a warehouse building. While LED lights may be more costly to buy initially, they quickly pay for themselves. The problem with incandescent light bulbs and compact fluorescent lights is the manner in which they release their energy. Due to how they release their energy, they waste a lot of it as heat. This will result in not only a higher electric bill for less light, but also an increased electric bill in order to run a fan or air conditioning unit to keep the room or building cool. In addition to this, LED tube lights bring with them many more utility rebates. This is because of how green they are, an effect of the reduced amount of carbon monoxide they use, and how efficiently they use the electricity given to them.
For more information on Ai LED light tubes, pls visit LED tube lights.
Friday, 27 February 2015
Tuesday, 24 February 2015
Why People Are Buying LED Bay Lights
Where LED bay lights are concerned, the popularity rates have suddenly gone up for the past few years it amazes many people. Well, if you have been a victim of recent financial difficulties that have hit the world like a hurricane; you will want to save the last penny you have. This is why buying LED lights for instance that you can use in different ways for different purposes is considered best. Due to the recent popularity of these lights, they can now be found in different styles as well as sizes in the market today. For homeowners who appreciate their decor and always want to remodel their homes around the decor they already have, these lights can be used.
LED high bay lights are designed to come in different colors and also they do not consume much electricity although they are very sharp and can brighten long distances. However; before you decide to buy any of these lights, you need to take some things into consideration. Many people look for offers a lot because they need to offer quality. The truth though is that, it is not every time that buying cheap products are good. There are times when buying cheap products is fine and there are times when they just are not worth it. These lights are inexpensive and offer users with great value for money.
If you want a light that will provide your big area with bright lights even with one bulb, then you can count on LED bay lights to offer you with such quality. There are many different types of these lights available with so many brands producing their own. All these brands have made it quite difficult for important choices to be made especially when buyers are not certain of which types and best. To make the right decision, you need to have a list to follow.
First of all, make sure you check your home and find out the specific areas where these lights will be fixed or needed. For rooms like your kitchen, the stairs and bathrooms, these lights need to be fixed. Secondly, consider the exact type of mood you need to or want to achieve in these areas or your home. This way, you will know which colors and sizes of lights to buy. Finally, make sure you buy all you need to buy from online stores. This is because; prices are reduced and you get to search for a while before purchases are made. With the internet, you can compare details and also prices of these lights.
Also, you can be assured of the very best testimonials that can tell you which brands are the best and which ones are not. There is no way you can live in a home without lights. However; some lights can cause you to have eye problems. This is what makes these types of lights the better option for everyone to go in for. As long as you can shop from the internet, you can buy as many as you want.
For more information on Ai LED bay lights, pls click here
LED high bay lights are designed to come in different colors and also they do not consume much electricity although they are very sharp and can brighten long distances. However; before you decide to buy any of these lights, you need to take some things into consideration. Many people look for offers a lot because they need to offer quality. The truth though is that, it is not every time that buying cheap products are good. There are times when buying cheap products is fine and there are times when they just are not worth it. These lights are inexpensive and offer users with great value for money.
If you want a light that will provide your big area with bright lights even with one bulb, then you can count on LED bay lights to offer you with such quality. There are many different types of these lights available with so many brands producing their own. All these brands have made it quite difficult for important choices to be made especially when buyers are not certain of which types and best. To make the right decision, you need to have a list to follow.
First of all, make sure you check your home and find out the specific areas where these lights will be fixed or needed. For rooms like your kitchen, the stairs and bathrooms, these lights need to be fixed. Secondly, consider the exact type of mood you need to or want to achieve in these areas or your home. This way, you will know which colors and sizes of lights to buy. Finally, make sure you buy all you need to buy from online stores. This is because; prices are reduced and you get to search for a while before purchases are made. With the internet, you can compare details and also prices of these lights.
Also, you can be assured of the very best testimonials that can tell you which brands are the best and which ones are not. There is no way you can live in a home without lights. However; some lights can cause you to have eye problems. This is what makes these types of lights the better option for everyone to go in for. As long as you can shop from the internet, you can buy as many as you want.
For more information on Ai LED bay lights, pls click here
Sunday, 22 February 2015
Save Your Money By Purchasing LED T8 Tubes For Your Houses
LED lights have made their reputation very well in the markets. As compared to other ordinary lights, these LEDs are better, much more reliable and consistent. These LEDs have become a better option in comparison to traditional and out of fashion lamps. The LED lights have so many benefits that have been facilitating a lot of people.
These lights do not consume a lot of electricity like the other fluorescents do. This is why people like installing these lights in different rooms of their houses. LED T8 tubes are commonly found installed in different houses. This is an innovation of LED lights. They are more reliable and powerful than the other type of LED lights. T8 tubes LED are available in different sizes as well as shapes that look really beautiful when installed in houses. Different shapes are designed for different rooms. For instance, most people like to install flood light type T8 tubes in the garden of their house because these LEDs give brighter looks to a garden.
A number of people who are not familiar about the advantages of LED T8 light tubes must try them at least once and then compare their usage with ordinary old fashioned lights they used for ages. Many people after using LED lights concluded that they are better, resistant and more reliable than the other fluorescents. Other lights consume more electricity and do not provide quality light, but LED T8 tubes without consuming more electricity like other fluorescents provide more powerful and brighter light.
For more than three years people have been noticing the benefits of T8 lightening. T8 tubes have been one of the best and cheapest options for high quality lightings. When these lights were introduced, different LED lights were really expensive. This is why it was very difficult for people to purchase them. With the passage of time these LED lights, especially T8 tubes became number one choice of people because of their cheaper rates and high quality performance. These LED lights can be seen installed in every second house these days. They are more compatible as well as power saving as compared to any other type of lights.
People have been purchasing T8 tubes for their homes and offices because of their wide variety functions. LED T8 tubes are approximately 30 percent more efficient than any other kind of fluorescents. They do not consume that much power voltage that other fluorescents do. They save both money and time of people. One major feature why these T8 tubes are better than other old fashioned lights is that they do not contain even a little amount of mercury or glass content. Mostly the lights are manufactured with some glass content and mercury that consume more electricity. This is why for the sake of saving money; people have been replacing their old fashioned fluorescents with the latest and cheapest T8 tubes. This choice of people has actually helped them a lot in saving their money from getting wasted with those old traditional fluorescents.
For more information on Ai LED T8 tubes, pls LED T8 tubes
These lights do not consume a lot of electricity like the other fluorescents do. This is why people like installing these lights in different rooms of their houses. LED T8 tubes are commonly found installed in different houses. This is an innovation of LED lights. They are more reliable and powerful than the other type of LED lights. T8 tubes LED are available in different sizes as well as shapes that look really beautiful when installed in houses. Different shapes are designed for different rooms. For instance, most people like to install flood light type T8 tubes in the garden of their house because these LEDs give brighter looks to a garden.
A number of people who are not familiar about the advantages of LED T8 light tubes must try them at least once and then compare their usage with ordinary old fashioned lights they used for ages. Many people after using LED lights concluded that they are better, resistant and more reliable than the other fluorescents. Other lights consume more electricity and do not provide quality light, but LED T8 tubes without consuming more electricity like other fluorescents provide more powerful and brighter light.
For more than three years people have been noticing the benefits of T8 lightening. T8 tubes have been one of the best and cheapest options for high quality lightings. When these lights were introduced, different LED lights were really expensive. This is why it was very difficult for people to purchase them. With the passage of time these LED lights, especially T8 tubes became number one choice of people because of their cheaper rates and high quality performance. These LED lights can be seen installed in every second house these days. They are more compatible as well as power saving as compared to any other type of lights.
People have been purchasing T8 tubes for their homes and offices because of their wide variety functions. LED T8 tubes are approximately 30 percent more efficient than any other kind of fluorescents. They do not consume that much power voltage that other fluorescents do. They save both money and time of people. One major feature why these T8 tubes are better than other old fashioned lights is that they do not contain even a little amount of mercury or glass content. Mostly the lights are manufactured with some glass content and mercury that consume more electricity. This is why for the sake of saving money; people have been replacing their old fashioned fluorescents with the latest and cheapest T8 tubes. This choice of people has actually helped them a lot in saving their money from getting wasted with those old traditional fluorescents.
For more information on Ai LED T8 tubes, pls LED T8 tubes
Monday, 16 February 2015
The Practicality Of A Commercial LED Flood Light
Generally, commercial LED flood lights are used for the purposes of security. When you hit the market to search for these lights, you will find them coming in two types which are the private and public. What makes these two different has to do with the size of the lights and also the level of illumination they produce. If you are buying a commercial LED flood light for your home, there is a standard type that can be purchased. Yes, this type is made from PIR halogen and requires only 600 watts of electricity power to work perfectly. Comparing this energy consumption to other types, you will realize your electricity bills will not increase when you use these lights. For many home owners, these lights are simply amazing and offer them with the quality they need.
Potential home owners anticipate a vital impact on their electricity bills and other costs. However; they do not increase your bills in any way. If you use commercial LED light, you can count on very low maintenance expense. Over the years, the popularity of these lights has increased. It is however important to consider the various benefits you can get from this light especially if you live in a dark neighborhood and want your residence to be safe. If you are wondering how you can know which brand is the best, there is no way to know until you have researched on every single brand. With the popularity of commercial LED flood lights increasing, there are new brands popping their heads to also offer the best lights in this form for consumers.
However; there needs to be a differentiation between quality and fake brands.
This is why you need to be very careful. There a quite a number of options available to you and all these options can lead you to finding the best commercial LED flood light which can offer you with the efficiency these lights represent. The internet is however; the best source for all the information you will need. Most homeowners use commercial LED flood lights during the night this means, you can count on they lasting long and offering you with the clear and bright light you seek or need for your transactions. There are quite a number of light types that are being introduced. It is however true that, some lights in the system can never be thrown out for these new types that are being introduced.
A house without quality lights both inside and outside loses its touch and is not regarded to be a house of class. However; with more lights in varieties of colors, there is much attention paid to you and this gives people that pass by your house a holistic view of you even before they get to see you. This is the type of way to live life and this is one of the ways to attract and gain the respect of people without saying a word to them. For wide varieties of these lights, make the internet your source.
For more information on Ai commercial LED flood lights, pls visit Commercial LED flood light
Potential home owners anticipate a vital impact on their electricity bills and other costs. However; they do not increase your bills in any way. If you use commercial LED light, you can count on very low maintenance expense. Over the years, the popularity of these lights has increased. It is however important to consider the various benefits you can get from this light especially if you live in a dark neighborhood and want your residence to be safe. If you are wondering how you can know which brand is the best, there is no way to know until you have researched on every single brand. With the popularity of commercial LED flood lights increasing, there are new brands popping their heads to also offer the best lights in this form for consumers.
However; there needs to be a differentiation between quality and fake brands.
This is why you need to be very careful. There a quite a number of options available to you and all these options can lead you to finding the best commercial LED flood light which can offer you with the efficiency these lights represent. The internet is however; the best source for all the information you will need. Most homeowners use commercial LED flood lights during the night this means, you can count on they lasting long and offering you with the clear and bright light you seek or need for your transactions. There are quite a number of light types that are being introduced. It is however true that, some lights in the system can never be thrown out for these new types that are being introduced.
A house without quality lights both inside and outside loses its touch and is not regarded to be a house of class. However; with more lights in varieties of colors, there is much attention paid to you and this gives people that pass by your house a holistic view of you even before they get to see you. This is the type of way to live life and this is one of the ways to attract and gain the respect of people without saying a word to them. For wide varieties of these lights, make the internet your source.
For more information on Ai commercial LED flood lights, pls visit Commercial LED flood light
Wednesday, 11 February 2015
The Difference Between Led Lights And Fluorescent Lights
There is the development of two forms of light, which is the Light-emitting Diode or LED and the Compact Fluorescent Light or CFL, that is aimed on solving electricity shortage issues which the planet is facing nowadays. However, how do we know which one to buy? Read on to find out more about the lights.
While some may choose the LED lights over the CFL but there are others who would attest the other way around. In order to be able to judge what really is the effective type, you should know the mechanisms on how they are able to produce the much needed light. CFL or compact fluorescent lamp is made up of a filament which has to be burned to produce light. As the process of burning takes place, much energy is utilized. Actually, it consumes about a quarter of energy which is consumed by an incandescent light bulb. An incandescent bulb is a source of electric light which works through the process of incandescence which is heat-driven light emissions and so it consumes much energy too. It is also known that CFL has a shorter life span as compared to LED.
LED or light-emitting diode produces light just like CFL however it does not contain filament and it does not involve heating and so it basically does not consume too much energy. As compared with an incandescent bulb, the LED light tube is more efficient in producing light as this only consumes about 9% of energy compared to the light bulb. One good thing about LED lights is that it lasts longer compared to that of a CFL's capacity to produce light. Ai LED light bulbs are more effective compared to CFL. It is a bit more expensive however you can use it longer than CFL, so you do not need to change lights at frequent intervals. There are a few suppliers which make poor quality LED and you must be aware of such as they do not work properly and they are more of a disadvantage than an advantage.
For more information on Ai LED light bulbs, pls visit LED light bulbs
While some may choose the LED lights over the CFL but there are others who would attest the other way around. In order to be able to judge what really is the effective type, you should know the mechanisms on how they are able to produce the much needed light. CFL or compact fluorescent lamp is made up of a filament which has to be burned to produce light. As the process of burning takes place, much energy is utilized. Actually, it consumes about a quarter of energy which is consumed by an incandescent light bulb. An incandescent bulb is a source of electric light which works through the process of incandescence which is heat-driven light emissions and so it consumes much energy too. It is also known that CFL has a shorter life span as compared to LED.
LED or light-emitting diode produces light just like CFL however it does not contain filament and it does not involve heating and so it basically does not consume too much energy. As compared with an incandescent bulb, the LED light tube is more efficient in producing light as this only consumes about 9% of energy compared to the light bulb. One good thing about LED lights is that it lasts longer compared to that of a CFL's capacity to produce light. Ai LED light bulbs are more effective compared to CFL. It is a bit more expensive however you can use it longer than CFL, so you do not need to change lights at frequent intervals. There are a few suppliers which make poor quality LED and you must be aware of such as they do not work properly and they are more of a disadvantage than an advantage.
For more information on Ai LED light bulbs, pls visit LED light bulbs
Tuesday, 10 February 2015
Is There Any Energy Saving With LED Fluorescent Tubes in Singapore
There are millions of general service fluorescent tubes in the market place today, until recently these were considered the most energy efficient lighting solution available. The disadvantage to this form of lighting is that each light tube contains a small amount of mercury vapour, a toxic heavy metal. This can provide not just a health risk when the tubes are broken, however it can also accumulate in landfills before entering the water table or causing further pollution.
Recent developments in SMD (Surface Mount Diode) LED technology have now meant that LED based fluorescent tubes are now a reality. LEDs are a more efficient form of lighting product consisting of small chips of conductive material that release light when a current is applied to them. They contain no filaments and can produce up to 25 times more light per watt than conventional light bulbs.
LED fluorescent tubes require far less energy in their manufacture than fluorescent tubes, and only 3% of the energy they will consume over their life expectancy is consumed in their manufacture, and they are also produced from non toxic materials. The light tubes are made from polycarbonate, a material which is more robust and durable than glass, so accidents will not need special cleanup procedures.
While LED technology is more expensive than existing fluorescents at face value, they will last up to 10 times as long, while consuming 65% less energy. In most general purpose lighting applications the additional cost of the LED fluorescent tubes in Singapore will more than pay for itself within the first 18 months.
The only drawback is the tighter beam angle of the LEDs, while some tubes are manufactured from a polycarbonate light diffusing material, others have a narrow focus which may not be suitable for replacing existing tubes. Many fluorescent fixtures are designed with reflectors that help to distribute the light from the tubes evenly in their intended environment.
For more information on Ai LED fluorescent tubes Singapore, pls click here
Recent developments in SMD (Surface Mount Diode) LED technology have now meant that LED based fluorescent tubes are now a reality. LEDs are a more efficient form of lighting product consisting of small chips of conductive material that release light when a current is applied to them. They contain no filaments and can produce up to 25 times more light per watt than conventional light bulbs.
LED fluorescent tubes require far less energy in their manufacture than fluorescent tubes, and only 3% of the energy they will consume over their life expectancy is consumed in their manufacture, and they are also produced from non toxic materials. The light tubes are made from polycarbonate, a material which is more robust and durable than glass, so accidents will not need special cleanup procedures.
While LED technology is more expensive than existing fluorescents at face value, they will last up to 10 times as long, while consuming 65% less energy. In most general purpose lighting applications the additional cost of the LED fluorescent tubes in Singapore will more than pay for itself within the first 18 months.
The only drawback is the tighter beam angle of the LEDs, while some tubes are manufactured from a polycarbonate light diffusing material, others have a narrow focus which may not be suitable for replacing existing tubes. Many fluorescent fixtures are designed with reflectors that help to distribute the light from the tubes evenly in their intended environment.
For more information on Ai LED fluorescent tubes Singapore, pls click here
Monday, 9 February 2015
Comparison Between LED Light Bulbs And Compact Fluorescent
Many countries, including the United States, are either considering phasing out incandescent light bulbs or have already passed laws to ban them. As standard light bulbs go the way of the dinosaurs, consumers are left with just two viable alternatives, LED light bulbs and compact fluorescent light bulbs (CFLs).
As LEDs are extremely energy efficient and can tolerate temperature variances and turbulence - all while lasting a long time - the quest began in an effort to create light bulbs by clustering numerous LED's together. And it's worked. LED light bulbs are now being produced that boast exceptional energy efficiency. A 7-watt LED light bulb, for example, can now replace a 75-watt incandescent bulb. As you can guess, the potential savings in energy costs and greenhouse gasses is huge.
With claims that they can last up to 15 years and use 90% less energy than the traditional bulb, LED light bulbs seem to be a no-brainer at first glance. But problems are prominent and LED light bulbs currently come up short.
LED light bulbs are quite costly. In fact, most people balk at spending $35.00 to $125.00 for just one light bulb, even when it results in a notable reduction in energy bills. Considering most homes have 30-plus light bulbs and businesses have significantly more, switching to LEDs is simply not an affordable option.
LED bulbs are not bright enough. While standard bulbs and CFLs illuminate light in all directions, the light from LED light bulbs is directed or focused, like a spotlight. While this works well for situations such as reading, work areas, and accent lighting, it results in unsatisfactory illumination for general lighting needs.
Their light output quickly degrades. Unlike incandescent bulbs, which release their heat, LEDs contain their heat, which causes their light quality to degrade. Even though heat syncs are added to redirect the heat to a circuit board, issues with temperature overload are still frequent. Tests have shown a loss of 50% of light output in 6 months.
Due to their brightness, stability and attractive pricing (not much more than incandescent bulbs) CFL's are currently the better choice for most homes and businesses. However, if you decide to take LEDs for a test drive, here are some tips:
Start out by trying just one LED light bulb. You have to take time research and read consumer feedback and reviews. Weigh the pros and the cons. Pay careful attention to warranties and guarantees from both the manufacturer and the store you buy from. Buy quality. Beware of the less expensive LED light bulbs as they are often problematic.
As LED technology improves and the prices starts to reduce, LED light bulbs will be worth taking a second look at in the future. However for now, CFLs are clearly the better overall choice.
For more information on Ai LED light bulb, pls visit LED light bulbs Singapore
As LEDs are extremely energy efficient and can tolerate temperature variances and turbulence - all while lasting a long time - the quest began in an effort to create light bulbs by clustering numerous LED's together. And it's worked. LED light bulbs are now being produced that boast exceptional energy efficiency. A 7-watt LED light bulb, for example, can now replace a 75-watt incandescent bulb. As you can guess, the potential savings in energy costs and greenhouse gasses is huge.
With claims that they can last up to 15 years and use 90% less energy than the traditional bulb, LED light bulbs seem to be a no-brainer at first glance. But problems are prominent and LED light bulbs currently come up short.
LED light bulbs are quite costly. In fact, most people balk at spending $35.00 to $125.00 for just one light bulb, even when it results in a notable reduction in energy bills. Considering most homes have 30-plus light bulbs and businesses have significantly more, switching to LEDs is simply not an affordable option.
LED bulbs are not bright enough. While standard bulbs and CFLs illuminate light in all directions, the light from LED light bulbs is directed or focused, like a spotlight. While this works well for situations such as reading, work areas, and accent lighting, it results in unsatisfactory illumination for general lighting needs.
Their light output quickly degrades. Unlike incandescent bulbs, which release their heat, LEDs contain their heat, which causes their light quality to degrade. Even though heat syncs are added to redirect the heat to a circuit board, issues with temperature overload are still frequent. Tests have shown a loss of 50% of light output in 6 months.
Due to their brightness, stability and attractive pricing (not much more than incandescent bulbs) CFL's are currently the better choice for most homes and businesses. However, if you decide to take LEDs for a test drive, here are some tips:
Start out by trying just one LED light bulb. You have to take time research and read consumer feedback and reviews. Weigh the pros and the cons. Pay careful attention to warranties and guarantees from both the manufacturer and the store you buy from. Buy quality. Beware of the less expensive LED light bulbs as they are often problematic.
As LED technology improves and the prices starts to reduce, LED light bulbs will be worth taking a second look at in the future. However for now, CFLs are clearly the better overall choice.
For more information on Ai LED light bulb, pls visit LED light bulbs Singapore
Thursday, 5 February 2015
The Color And Style Of LED Light Tubes in Singapore
LED light tubes are taking over in many instances where there was a traditional style light before. There are many reasons why these tube lights are becoming the preferred type of light with suppliers and consumers alike. The LED lighting lamps can be in small bulbs or in long tubes that can be strung together for an amazing display. And these tubes are becoming popular as they have various great advantages which meet several needs and desires.
One of the advantages to using LED tube lighting is that they can be colored. There are various different uses for colored LED lights. These colored light tubes are mostly seen in items like headlamps, marketing materials, and even a stage show for a DJ. Colors are not just limited to the primary colors, but with a wide range of options to choose from.
Another advantage of LED tube lights is that they are quite easy to work with. Many lights are configured in a certain shape, length, or size. LED light tubes, sometimes called 'rope lights', have several diameters to choose from and can be bent along any type of corner.
LED tube lights are used in different applications nowadays. They give business owners avenue from which to either sell their products or to enhance the atmosphere with colors, style and sights. As the tube lights are installed, they can continue to grow, or be shortened, if the need for the light changes. Through the versatility of the tube lights, people can now add their own design aspects to their favorite room, or even their outdoor sitting area.
Many business owners will use this type of LED lights as a way to attract attention to a certain product or aspect of their building. This will definitely allow business owners to continually change the look of their building for further enhancement and enjoyment.
The best benefit to using an LED light tube is found within the bottom line. Changing from one type of light to another should assist you save money in the process. Traditional light tubes not only use more energy than LED lights but they must also be replaced more often. LED light tubes in Singapore continue to shine for many years after they have been used.
For more information on Ai LED light tubes Singapore, pls click here
One of the advantages to using LED tube lighting is that they can be colored. There are various different uses for colored LED lights. These colored light tubes are mostly seen in items like headlamps, marketing materials, and even a stage show for a DJ. Colors are not just limited to the primary colors, but with a wide range of options to choose from.
Another advantage of LED tube lights is that they are quite easy to work with. Many lights are configured in a certain shape, length, or size. LED light tubes, sometimes called 'rope lights', have several diameters to choose from and can be bent along any type of corner.
LED tube lights are used in different applications nowadays. They give business owners avenue from which to either sell their products or to enhance the atmosphere with colors, style and sights. As the tube lights are installed, they can continue to grow, or be shortened, if the need for the light changes. Through the versatility of the tube lights, people can now add their own design aspects to their favorite room, or even their outdoor sitting area.
Many business owners will use this type of LED lights as a way to attract attention to a certain product or aspect of their building. This will definitely allow business owners to continually change the look of their building for further enhancement and enjoyment.
The best benefit to using an LED light tube is found within the bottom line. Changing from one type of light to another should assist you save money in the process. Traditional light tubes not only use more energy than LED lights but they must also be replaced more often. LED light tubes in Singapore continue to shine for many years after they have been used.
For more information on Ai LED light tubes Singapore, pls click here
What Are The Benefits Of LED Tube Lighting in Singapore?
Most people including scientists and researchers are looking for ways to improve the environment, They have been attempting to create an alternative to the traditional tube lighting. This lighting is now being replaced with LED tube lighting which is more cost effective and also very environmentally friendly. The use of fluorescent lamps have grown in the last few years to include homes and offices. This is because they are more cost effective than incandescent bulbs. They also give off better light than normal light bulbs.
But there are some problems with fluorescent tube lighting. The ballast and plugs for this type of lighting must be wired into a home or office. Once installed it is very difficult to replace the lighting because of the ballast and plugs that are used for this tube lighting. The LED to has been designed to be a drop-in replacement for the fluorescent bulb.
The LED tube does not contain mercury or toxic gases and it consumes less than 60% of the energy used by incandescent lamps. The fluorescent tubes use less than 14 to 24 W of energy. The lifespan of these tubes is between 50,000 and 100,000 hours and as such making them very cost effective and efficient.
When installing the LED lighting, there is no need for a ballast. This removes much of the effort that is required and placing and replacing the tubes. The operating temperature of this lighting is only 100 degrees making it possible to remove or replace the lighting when needed without waiting for it to cool down.
The light tubes are made using a long silicon substrate containing several LEDs. The LEDs are space out that the lighting is smooth and even across the two. This substrate is then encased in a glass tube which makes it ready to be installed. Since the tubes contain no chemicals or toxins and as such they can be disclosed as regular waste.
When selecting the correct LED lighting for your home or office, you may need to consider the level of light that you require in that area. There are different levels of light available with the LED lighting tubes which can generate a bright glow in a row, or give it a soft feel. Maintaining the environmental standards of the room will be very simple once you use the energy-efficient LED fluorescent lamps which have the level of light that you require.
Talking to an individual who has knowledge and expertise and the types of LED tube lighting available will be very helpful. This individual will be able to give you information and data about the advantages of switching from your fluorescent tube lighting to LED. The cost savings over the long term are quite significant when the LED tube lighting in Singapore is used.
For more information on Ai LED tube lighting Singapore, pls click here
But there are some problems with fluorescent tube lighting. The ballast and plugs for this type of lighting must be wired into a home or office. Once installed it is very difficult to replace the lighting because of the ballast and plugs that are used for this tube lighting. The LED to has been designed to be a drop-in replacement for the fluorescent bulb.
The LED tube does not contain mercury or toxic gases and it consumes less than 60% of the energy used by incandescent lamps. The fluorescent tubes use less than 14 to 24 W of energy. The lifespan of these tubes is between 50,000 and 100,000 hours and as such making them very cost effective and efficient.
When installing the LED lighting, there is no need for a ballast. This removes much of the effort that is required and placing and replacing the tubes. The operating temperature of this lighting is only 100 degrees making it possible to remove or replace the lighting when needed without waiting for it to cool down.
The light tubes are made using a long silicon substrate containing several LEDs. The LEDs are space out that the lighting is smooth and even across the two. This substrate is then encased in a glass tube which makes it ready to be installed. Since the tubes contain no chemicals or toxins and as such they can be disclosed as regular waste.
When selecting the correct LED lighting for your home or office, you may need to consider the level of light that you require in that area. There are different levels of light available with the LED lighting tubes which can generate a bright glow in a row, or give it a soft feel. Maintaining the environmental standards of the room will be very simple once you use the energy-efficient LED fluorescent lamps which have the level of light that you require.
Talking to an individual who has knowledge and expertise and the types of LED tube lighting available will be very helpful. This individual will be able to give you information and data about the advantages of switching from your fluorescent tube lighting to LED. The cost savings over the long term are quite significant when the LED tube lighting in Singapore is used.
For more information on Ai LED tube lighting Singapore, pls click here
Tuesday, 3 February 2015
The Basic Information On LED Tubes
Fluorescent lighting have become more popular in the households and offices. However, recent researches have found out that these can be very harmful to the environment. There are chances for the occurrence of severe head aches in the people who are exposed to fluorescent light tubes for a long time. These lights contain mercy and lead that are risky to the environment. Even when these lights are disposed they remain as harmful toxic waste.
LED tube light that does not emit mercury or any other kind of toxic gases is the new innovation which is popularly recommended to replace usual traditional bulbs and other fluorescent light tubes. LEDs are more environment friendly and cost effective. They consume less that 60% of the energy consumed by incandescent lamps. These will have a longer lifespan and also it will remain intact for 50,000 to 100,000 hours.
LED is a light emitting diode. It is a semiconductor diode which emits light. They are manufactured using a different technology as compared to fluorescent lights. Fluorescent lights use electrodes and a combination of argon and mercury to produce light. However, LEDs are small bulbs which produce light. The movement of electrons in the diode helps in producing light. A LED tube is made of hundreds of LEDs. The indicator bulbs in the LED tube lights produce low intensity red light or bright light.
The LEDs are popularly used by commercial and motor industries, agriculture sector and also in the traffic lights. It is a simple task to install this tube. It is designed for a drop in replacement for fluorescent tubes. However sometimes a bit of modifications need to be made.
The cost of the light tube is expensive when compared to fluorescent lights. The cost is usually $50 to $100. As the life span of these lights is more, it will not be a loss even if you spend these much money. These light tubes come in various sizes and colors. The available sizes are 2, 4 or 6 feet. And these light tubes can be disposed like any other waste. They can be bought along with new fixtures. These do not require ballasts which are commonly used by fluorescent light tubes and so when these tubes are fixed ballasts are to be removed.
With all these benefits, LED tubes are gaining popularity over the traditional bulbs. These are efficient energy savers and consumer friendly.
For more information on Ai LED tube light Singapore, pls click here
LED tube light that does not emit mercury or any other kind of toxic gases is the new innovation which is popularly recommended to replace usual traditional bulbs and other fluorescent light tubes. LEDs are more environment friendly and cost effective. They consume less that 60% of the energy consumed by incandescent lamps. These will have a longer lifespan and also it will remain intact for 50,000 to 100,000 hours.
LED is a light emitting diode. It is a semiconductor diode which emits light. They are manufactured using a different technology as compared to fluorescent lights. Fluorescent lights use electrodes and a combination of argon and mercury to produce light. However, LEDs are small bulbs which produce light. The movement of electrons in the diode helps in producing light. A LED tube is made of hundreds of LEDs. The indicator bulbs in the LED tube lights produce low intensity red light or bright light.
The LEDs are popularly used by commercial and motor industries, agriculture sector and also in the traffic lights. It is a simple task to install this tube. It is designed for a drop in replacement for fluorescent tubes. However sometimes a bit of modifications need to be made.
The cost of the light tube is expensive when compared to fluorescent lights. The cost is usually $50 to $100. As the life span of these lights is more, it will not be a loss even if you spend these much money. These light tubes come in various sizes and colors. The available sizes are 2, 4 or 6 feet. And these light tubes can be disposed like any other waste. They can be bought along with new fixtures. These do not require ballasts which are commonly used by fluorescent light tubes and so when these tubes are fixed ballasts are to be removed.
With all these benefits, LED tubes are gaining popularity over the traditional bulbs. These are efficient energy savers and consumer friendly.
For more information on Ai LED tube light Singapore, pls click here
Monday, 2 February 2015
The Installation Of LED Tube Lights in Singapore
By installing LED tube lights, you can save money on electricity bills and get potentially risky fluorescent lights out of your home or office. But, most LED light tubes on the market nowadays can not be directly installed in an existing fluorescent fixture. You will have to make some simple modifications to the fixture in order to properly install the bulbs.
Installing an LED tube light in an existing fluorescent fixture is quite simple. Additionally, you should be able to purchase fixtures especially designed for LED light tubes in the near future, and they should actually be less expensive than the equivalent fluorescent fixtures. This article will provide a brief overview explaining what you need to know in order to install the new energy-saving fluorescent tube lights in an existing tube lighting fixture.
Fluorescent fixtures are designed to support a specific types and size of fluorescent tube. A fluorescent tube is incorporated into a fluorescent lighting system which consists of two or three main components:
(1) the fluorescent lamp (fluorescent bulb or tube)
(2) the ballast, and
(3) the starter system.
Additionally, the system for a tube light includes a lamp holder and a switch. Depending on the particular fluorescent lighting system, the starter may be a replaceable component, a starter may not be needed, or the starter function may be integrated into the ballast. The starting function may also rely on the physical design of the fixture. To retrofit a tube light fixture to support an LED tube lights, the ballast (and the starter if a separate one is present) must be disconnected.
A few simple tools are needed, including a wire cutter and wire stripper (often incorporated into the same tool), a pair of pliers, a screwdriver, and a few wire nuts for reconnecting the wires once you have removed the ballast.
Once the old lamps are removed from the lamp holders and the electricity to the fixture is turned off, you will probably have to remove the reflector that is located behind the bulbs and provides a housing for the wiring and ballast that lie behind it. Typically, it is quite simple to remove the reflector or cover, however if it is not clear how to do this, you should consult the documentation from the fixture manufacturer.
If the fixture has an electronic ballast, you only need to remove that and then wire the power directly to the lamp holders, completing one circuit for each bulb. This is fairly simple, and typically you can use the existing wire in the fixture and then just add some wire nuts. If you have an older fixture with a magnetic ballast and starter, you will have to remove or open the starter and remove or short the magnetic ballast.
Once the ballast have been removed and the wires reconnected to complete a circuit for each bulb, replace the reflector or cover over the wiring and the area where the ballast was located, and the LED tube lights in Singapore can be inserted in the end sockets. Unlike fluorescent bulbs which do not have a top or bottom, an LED tube light will have an obvious top and bottom, with metallic heatsink located on the backside of the tube and the LEDs visible under a lens on the side that will be aimed towards the area to be illuminated. Place the cover back on the fixture (if there was one) and turn on the electricity. Turn on the switch and if you have done everything properly, you should have as good or better lighting using approximately half the electricity and lasting as long as 50,000 hours or more.
For more information on Ai LED tube light Singapore, pls click here
Installing an LED tube light in an existing fluorescent fixture is quite simple. Additionally, you should be able to purchase fixtures especially designed for LED light tubes in the near future, and they should actually be less expensive than the equivalent fluorescent fixtures. This article will provide a brief overview explaining what you need to know in order to install the new energy-saving fluorescent tube lights in an existing tube lighting fixture.
Fluorescent fixtures are designed to support a specific types and size of fluorescent tube. A fluorescent tube is incorporated into a fluorescent lighting system which consists of two or three main components:
(1) the fluorescent lamp (fluorescent bulb or tube)
(2) the ballast, and
(3) the starter system.
Additionally, the system for a tube light includes a lamp holder and a switch. Depending on the particular fluorescent lighting system, the starter may be a replaceable component, a starter may not be needed, or the starter function may be integrated into the ballast. The starting function may also rely on the physical design of the fixture. To retrofit a tube light fixture to support an LED tube lights, the ballast (and the starter if a separate one is present) must be disconnected.
A few simple tools are needed, including a wire cutter and wire stripper (often incorporated into the same tool), a pair of pliers, a screwdriver, and a few wire nuts for reconnecting the wires once you have removed the ballast.
Once the old lamps are removed from the lamp holders and the electricity to the fixture is turned off, you will probably have to remove the reflector that is located behind the bulbs and provides a housing for the wiring and ballast that lie behind it. Typically, it is quite simple to remove the reflector or cover, however if it is not clear how to do this, you should consult the documentation from the fixture manufacturer.
If the fixture has an electronic ballast, you only need to remove that and then wire the power directly to the lamp holders, completing one circuit for each bulb. This is fairly simple, and typically you can use the existing wire in the fixture and then just add some wire nuts. If you have an older fixture with a magnetic ballast and starter, you will have to remove or open the starter and remove or short the magnetic ballast.
Once the ballast have been removed and the wires reconnected to complete a circuit for each bulb, replace the reflector or cover over the wiring and the area where the ballast was located, and the LED tube lights in Singapore can be inserted in the end sockets. Unlike fluorescent bulbs which do not have a top or bottom, an LED tube light will have an obvious top and bottom, with metallic heatsink located on the backside of the tube and the LEDs visible under a lens on the side that will be aimed towards the area to be illuminated. Place the cover back on the fixture (if there was one) and turn on the electricity. Turn on the switch and if you have done everything properly, you should have as good or better lighting using approximately half the electricity and lasting as long as 50,000 hours or more.
For more information on Ai LED tube light Singapore, pls click here
Subscribe to:
Posts
(
Atom
)