LED Tube Light Installation Made Simple

Installing LED tube lights is a great way to save money on electricity and get potentially hazardous fluorescent lights out of your home or office. 

However, most LED light bulbs on the market today can not just be directly installed in an existing fluorescent fixture. 

You will have to make some simple modifications to the fixture to properly install the bulbs. The good thing is that installing this type tube light in an existing fluorescent fixture is relatively simple. 

In addition, you should be able to buy fixtures especially designed for LED tube lights in the near future, and they should actually be cheaper than the equivalent fluorescent fixtures.

Fluorescent fixtures are designed to support a specific types and size of fluorescent tube. A fluorescent tube is incorporated into a fluorescent lighting system which consists of two or three main components: (1) the fluorescent lamp (fluorescent bulb or tube), (2) the ballast, and (3) the starter system. 

In addition, the system for a tube lamp includes a lamp holder and a switch. Depending on the particular fluorescent lighting system, the starter may be a replaceable component, a starter may not be required, or the starter function may be integrated into the ballast.

Make sure that the LED replacement tube lights are the correct size for the fixture. Also, always remember that when servicing a fluorescent fixture or lamp for any reason, electrical power to the entire fixture should be disconnected.

This is not always practical in situations where a large number of fixtures are controlled from the same power control (such as in open office areas). In these cases, insulating gloves and a nonmetallic ladder should be used if the fixtures must be serviced when power is present.

Once the old bulbs are removed from the lamp holders and the electricity to the fixture is turned off, you will probably have to remove the reflector that is located behind the bulbs and provides a housing for the wiring and ballast that lie behind it. 

In fact, It is fairly easy to remove the reflector or cover, however if it is not clear how to do this, you should consult the documentation from the fixture supplier.

Depending on how much wire you have to work with, it is a good idea to leave long enough wires leading out of the ballast to be able to reconnect the ballast with wire nuts.

This is only when you ever want to convert the fixture back to use for fluorescent LED light tubes or want to use the ballast somewhere else. 

Typically, the ballast will have two screws or bolts holding it in place in the fixture, and these can be removed using a screwdriver or pair of pliers, as appropriate. The ballast should be disposed of in accordance with local regulations as should the old fluorescent bulbs. 

It is because the fluorescent bulbs contain a small amount of highly-toxic mercury, these lights should be treated as hazardous waste and disposed of as soon as possible.

Unlike fluorescent bulbs which do not have a top or bottom, an LED tube light will have an obvious top and bottom, with metallic heat sink located on the backside of the tube and the LEDs visible under a lens on the side that will be aimed towards the area to be illuminated. 

Place the cover back on the fixture (if there was one) and turn on the electricity. Turn on the switch and if you have done everything properly, you should have as good or better lighting using approximately half the electricity and lasting as long as 50,000 hours or more.

For more information on Ai LED tube light, pls visit Ai LED light tubes

A Quick Look At The Benefits Of LED Tube Light

The LED tube light is presently overtaking the fluorescent light bulbs which have been a mainstay in many businesses and kitchens for many years. Although the amount of light produced has made light bulbs consistently a choice for areas needing bright lighting, the LED lighting has proven to meet all these challenges.

LED lighting is available in most of the same tube sizes and shapes as traditional fluorescent lighting. One of the great benefits of switching out the fluorescent bulbs for LED is the fact that the process is quite simple. The LED lights is able to fit into the prongs of the fluorescent lighting bulbs and the plug-in replacement is easy.

The areas where this lighting is usually used are normally active for several hours on a daily basis and are costly to utilize. The maintenance and repair of these bulbs can be very high and energy costs can make them cost prohibitive. Additionally, the bulbs contain mercury which can be dangerous and harmful if the bulb breaks.

The LED tube lighting is a high efficiency lighting bulb which uses less than than sixty percent of the energy that an incandescent light bulb uses. The standard tube replacements use only 14-24 watts of energy and in fact last from 50000 to 100000 hours before they should be replaced. They have great color quality and the same color dynamics as their counterpart.

The tubes have a plastic tube housing and do not need the energy sucking ballast of the fluorescent. With an operating temperature of 100 degrees, the light bulb does not get as hot as other lighting bulbs and normally has a life span of up to eight times than that of a normal incandescent bulb.

The tube is manufactured with a long silicon substrate which has several LEDs mounted on it. The substrate is enclosed in a glass tube and ready for installation. It does not contain toxic chemicals such as mercury and also provide an environmentally friendly means to provide light which is equal to fluorescent light bulbs.

Talking to an expert who has knowledge and the know-how in the different types of lighting available and their impact on the environment will be much helpful. Definitely, they will be able to provide important information which will help you to make the best decision about what type of LED lamp will be most effective in your home or office.

For more information on Ai LED tube lighting, pls visit Ai LED tube light

How To Install An LED Tube Light

The sale of LED tube light fittings for homes has substantially increased in recent years. The main reason for this being that most people are coming to realize just how cost effective such lighting can be.

If you do decide to invest money buying such lighting for your home you could either pay someone to install the new light fittings for you or you can do the work yourself. We would only recommend you install the light fittings yourself if you fully know what you are doing and of course you have the right tools.

When it comes to installing an LED tube light in your home there are certain things that you should be doing. Below we take you through the things that need to be done in order to install such a light in your home.

Step 1 - Before you can replace your current fluorescent light with an LED one the first thing you need to understand is that the current one is made up of three components. Within a fluorescent light you will find ballast, a starter and the tube light which all have to be removed and got rid of in the correct manner. Dumping them directly in the bin isn't the right way you will be required to take them to a recycling plant.

Step 2 - Before you begin removing your current tube light you must make sure that all power to that area of the home has been turned off. If you need to turn off power to your home completely rather than to that particular area. Also make sure that you have the necessary tools with you before removal of the tube light begins. The kinds of tools you will need to carry out removal of such a fitting to replace with a new LED tube light are a screwdriver, a wire stripper and a wire cutter plus items such as wire and nuts and bolts.

Step 3 - To remove the current fluorescent tube light you need to first remove the cover. Generally this just slides out and should be placed to one side. If you can get someone to help you by taking away the components as you hand them down to them.

Step 4 - The next thing you need to do is of course remove the fluorescent tube, be very careful, as you don't want to break it. Once the tube has been taken out you can now start to remove the rest of the fluorescent light fitting. To remove the part mounted to the ceiling simply requires you to remove some screws that are holding flush against the ceiling. Be careful and make sure that you disconnect this part of the light from the wiring properly. Most times you will find it is a very simple case of undoing a couple of screws and the wires will come loose.

Step 5 - Once you have finally removed the old tube light you are ready to install the new LED tube light. You simply have to do the steps mentioned above in reverse

For more information on Ai LED tube light, pls visit LED tube lights.

What Are The Benefits Of LED Tube Lighting in Singapore?

Most people including scientists and researchers are looking for ways to improve the environment, They have been attempting to create an alternative to the traditional tube lighting. This lighting is now being replaced with LED tube lighting which is more cost effective and also very environmentally friendly. The use of fluorescent lamps have grown in the last few years to include homes and offices. This is because they are more cost effective than incandescent bulbs. They also give off better light than normal light bulbs.

But there are some problems with fluorescent tube lighting. The ballast and plugs for this type of lighting must be wired into a home or office. Once installed it is very difficult to replace the lighting because of the ballast and plugs that are used for this tube lighting. The LED to has been designed to be a drop-in replacement for the fluorescent bulb.

The LED tube does not contain mercury or toxic gases and it consumes less than 60% of the energy used by incandescent lamps. The fluorescent tubes use less than 14 to 24 W of energy. The lifespan of these tubes is between 50,000 and 100,000 hours and as such making them very cost effective and efficient.

When installing the LED lighting tubes, there is no need for a ballast. This removes much of the effort that is required and placing and replacing the tubes. The operating temperature of this lighting is only 100 degrees making it possible to remove or replace the lighting when needed without waiting for it to cool down.

The light tubes are made using a long silicon substrate containing several LEDs. The LEDs are space out that the lighting is smooth and even across the two. This substrate is then encased in a glass tube which makes it ready to be installed. Since the tubes contain no chemicals or toxins and as such they can be disclosed as regular waste.

When selecting the correct LED lighting for your home or office, you may need to consider the level of light that you require in that area. There are different levels of light available with the LED lighting tubes which can generate a bright glow in a row, or give it a soft feel. Maintaining the environmental standards of the room will be very simple once you use the energy-efficient LED fluorescent lamps which have the level of light that you require.

Talking to an individual who has knowledge and expertise and the types of LED tube lighting available will be very helpful. This individual will be able to give you information and data about the advantages of switching from your fluorescent tube lighting to LED. The cost savings over the long term are quite significant when the LED tube lighting is used.




For more information on LED tube lighting Singapore, pls click here