There are millions of general service
fluorescent tubes in the market place today, until recently these were
considered the most energy efficient lighting solution available.
The
disadvantage to this form of lighting is that each light tube contains a small
amount of mercury vapour, a toxic heavy metal.
This can provide not just a
health risk when the tubes are broken, however it can also accumulate in
landfills before entering the water table or causing further pollution.
Recent developments in SMD (Surface Mount Diode) LED technology have now meant that LED based fluorescent tubes are now a reality.
Recent developments in SMD (Surface Mount Diode) LED technology have now meant that LED based fluorescent tubes are now a reality.
LEDs are a more efficient form of lighting
product consisting of small chips of conductive material that release light
when a current is applied to them.
They contain no filaments and can produce up
to 25 times more light per watt than conventional light bulbs.
LED fluorescent tubes require far less energy in their manufacture than fluorescent tubes.
LED fluorescent tubes require far less energy in their manufacture than fluorescent tubes.
In fact, only 3% of the
energy they will consume over their life expectancy is consumed in their
manufacture. They are also produced from non toxic materials.
The light
tubes are made from polycarbonate, a material which is more robust and durable
than glass, so accidents will not need special cleanup procedures.
While LED technology is more expensive than existing fluorescents at face value, they will last up to 10 times as long, while consuming 65% less energy.
While LED technology is more expensive than existing fluorescents at face value, they will last up to 10 times as long, while consuming 65% less energy.
In most general purpose lighting applications the
additional cost of the LED fluorescent light tubes will more than pay for itself within the first 12 months.
The only drawback is the tighter beam angle of the LEDs, while some tubes are manufactured from a polycarbonate light diffusing material, others have a narrow focus which may not be suitable for replacing existing tubes.
The only drawback is the tighter beam angle of the LEDs, while some tubes are manufactured from a polycarbonate light diffusing material, others have a narrow focus which may not be suitable for replacing existing tubes.
Many fluorescent fixtures are designed with reflectors that
help to distribute the light from the tubes evenly in their intended
environment.
For more information on Ai LED fluorescent tubes, pls visit Ai LED fluorescent light tubes
For more information on Ai LED fluorescent tubes, pls visit Ai LED fluorescent light tubes
No comments :
Post a Comment