Incandescent lighting is the oldest of the three and, at this point, the most
commonly used.
Compact fluorescent arrived on the scene after that, with many
improvements and in fact they proved to be much more efficient than
incandescent light bulbs.
LED lights, or light emitting diodes, were next and
blew incandescent and compact fluorescent lighting out of the water. All three
differ in how they utilize electricity and direct current, how much they cost,
and how much maintenance they will need.
Whether buying a commercial LED flood light or one simple
incandescent bulb for a desk lamp, it's important to know what you are buying
and what it entails.
Incandescent light bulbs have not changed much since They consist of a simple glass shape, usually molded while hot in a process called glass blowing, and have a coil of tungsten wire on the inside.
Incandescent light bulbs have not changed much since They consist of a simple glass shape, usually molded while hot in a process called glass blowing, and have a coil of tungsten wire on the inside.
That tungsten wire absorbs
electricity when you turn the switch on, closing the circuit. The wire glows
red hot, and releases energy as both heat and light.
As the manner in which
current is used in an incandescent light bulb, as well as its archaic nature,
they happen to be incredibly inefficient.
Incandescent light bulbs release
about ninety percent of their energy as heat, using only ten percent of it as
visible light. As a result, it also burn out more frequently and must be
replaced more often.
Compact fluorescent lights are composed of a mixture of argon and mercury vapors, housed in a spiral shaped tube, coated on the inside with fluorescent coating.
Compact fluorescent lights are composed of a mixture of argon and mercury vapors, housed in a spiral shaped tube, coated on the inside with fluorescent coating.
When the vapors are energized, their atoms get excited and jump to the
next level. As such, it causes a release of ultraviolet radiation, that is then
absorbed by the fluorescent coating.
That fluorescent coating converts the
ultraviolet light to visible light, which can then be used to light an entire
room or building! Fluorescent lights are more efficient, and give off less heat
than traditional lights, but they are not inherently perfect.
LED light consists of a diode and a semiconductor that emits light. The diode allows current to travel in only one direction, and the semiconductor determines the color of the light that is released.
Due to the nature by which it use the electricity sent to them,
they are about be seventy-five percent more efficient as compared to candescent
lights and twenty-five percent more efficient than compact fluorescent light
bulbs.
This also results in this type of lights lasting a lot longer than other types of
lighting for the sheer fact that they don't "burn out" as often.
Although the initial cost of LED flood lighting bulb is a bit expensive, especially if you compare to traditional lights being only a few dollars at a grocery store, they turn up to be much cheaper over time.
Although the initial cost of LED flood lighting bulb is a bit expensive, especially if you compare to traditional lights being only a few dollars at a grocery store, they turn up to be much cheaper over time.
Some business owners are giving discounts for LED lighting bulbs,
while none are available for incandescents and just a few for compact
fluorescent tubes.
And the fact that they use energy more efficiently will
significantly reduce bills, even when purchasing a commercial LED flood light.
For more information on Ai LED commercial flood light , pls
visit Ai LED flood light
No comments :
Post a Comment